Spectrum-controls 1771sc-IFE32 Instrukcja Użytkownika Pobierz pdf (Strona 35)

Chapter 4: Configuring Your Module 25

max_scale = 1000

BCD

= 1000

If scaling is defined properly the min scale value is less than the max scale value

(scale

min

< scale

max

). If the min scale value is not less than the max scale value a

configuration fault is declared and scaling is not applied.

*If min = max = 0 then scaling is disabled. This is the default configuration.

Scale Scale

Scale

oror

d Configuration Bitsd Configuration Bits

d Configuration Bits

Word/Bit 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 Group

0 Channel 1 Min Scale Min Scale

1 Channel 1 Max Scale Max Scale

62 Channel 32 Min Scale Min Scale

63 Channel 32 Max Scale Max Scale

If differential mode is used every other channel scale group is skipped. For example,

when channel 1 is used in differential mode Scale Word 0 (Min Scale) and Word 1

(Max Scale) are used. Word 2 and Word 3 are skipped. Word 4 and Word 5 are Min

and Max Scale words for channel 2, etc.

Scaling: *Default:

Min Scale Value (Binary) 0

Max Scale Value (Binary) 0

Important:

If scaling is selected for any channel, all channels must be scaled. If scaling is not

required on certain channels, set those to the default input range: 0 to 4095 for 0 to +

voltage or current ranges, and -4095 to +4095 for - to + voltage or current ranges.

If scaling is not selected, the module BTR file length will be 23.

Important: Use decimally addressed bit locations for PLC-5 processors.

The module will return values outside the scaling range. For example, if a module is in

the 0–5V dc mode, scaled for 0 to 5000, and has –2V dc applied, it will return –2000.

Default Configuration:Default Configuration:

Default Configuration:

If a write block of five words, with all zeroes, is sent to the Analog Input Module (cat.

no. 1771sc-IFE32), default selections will be:

· 1 to 5V dc or 4 to 20mA (dependent on configuration jumper setting)

· BCD data format

· no real time sampling (RTS)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 49 50

Komentarze do niniejszej Instrukcji

Brak uwag

Spectrum-controls 1771sc-IFE32 Instrukcja Użytkownika Strona 35

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Spectrum-controls 1771sc-IFE32